arc flash proof rated overalls categories up to 47cd/cm2 2018-12-07T06:15:34+00:00

Project Description

arc flash overalls

arc flash proof rated overalls categories up to 47cd/cm2

General description of arc flash overalls

When an arc occurs, huge energy is released in a very short period of time. Metal conductive elements can vaporize causing rapid expansion of hot steam and metal. The rapid and thermal expansion of air and metal vapors can cause loud explosions and great pressure.

The main causes of arcing: Conductors with poor performance, damage to insulation materials (including cracks, water ingress, aging, etc.), accidental contact with charged objects by humans or other objects, design or installation errors, poor maintenance of equipments.

Arc damage forms:

  • Electric Arc Blast Burn, which is the most serious injury in the arc, comes mainly from thermal radiation and splattering molten metal from the arc explosion.

  • Electric arc explosion caused the clothes to be ignited and burning which resulting in serious burns.

  • The loud noise produced by the explosion of the electric arc hurt the hearing.

  • Physical damage to the human body from the impact of an arc explosion.

  • Permanent anti-arc: the raw material fiber itself has a flame retardant properties, with a permanent protection, will not reduce the protective performance by repeatedly washing.

  • Will not be ignited by the heat and not continue to burn; no melt dripping.

  • High temperature- resistance, will not deform in case of high temperature and other physical changes.

  • High tearing strength, wear-resistant, stable dimension, not broken easily;

  • In the event of arc explosion or flame, fabric fibers will expand and thicken, close the fabric gap, resulting in energy protection barrier to isolate the human body and heat, so that the degree of arc damage is to be minimized.

Forbidden to use alone under following circumstances:

Arc flash rated overalls is forbidden to be used alone in the special case of chemical and biological hazards, poisonous gas and viruses, radioactive substances, unidentified gas and liquid. It should be used together with other corresponding protective clothing.

When flash proof overalls is wet and needs to be dried as soon as possible, if there is stain, it should be washed as soon as possible to remove stains and dry it, so as to avoid mold or germs. Machine washing or hand wash are both available, try to use neutral detergent, do not wash with other clothes. 40-48 degrees Celsius Water temperature is better, do not use bleach and softener. Avoid prolonged exposure fluorescent light to prevent UV damage to clothing performance. For grease stains, blood stains and other serious stains, before washing, please apply dry cleanser and rub by hand and brush slightly and d rubbing or brush lightly; then to rinse with water to remove the blood stains. Please use disinfectant for disinfection after removing blood stain.



If it is worn, tear, burned or corroded to damage the original structure. Please arrange the professional repair as soon as possible. we recommend the use of raw materials from our company for repair in order to better maintain its original performance. Self-repair by ordinary surface materials is forbidden.



This arc flash coveralls categories, must be washed and dried before storage.

It must not be put together with corrosive goods, storage should be dry and ventilated; 200mm away from the wall and the ground.

FCL stored in the card board, so as to avoid prolonged exposure to ground moisture. To prevent ultraviolet radiation for a long time. For long time preservation, should pay attention to regular drying to avoid mildew, insects and breeding bacteria.

Contact us for a quote-today




By using this form you agree with the storage and handling of your data by this website.